YOKOGAWA UTAdvanced UT55A, User Manual

Page: 434 / 476

18-23
IM 05P01C31-01EN
Parameters
18
Input Range/SP Limiter/Input Switch/Input Auto-selector Setting Menu (Menu: MPV)
Parameter
symbol
Name
Display
level
Setting range Initial value
P.UNI
Control PV input
unit
STD
-: No unit
C: Degree Celsius
-: No unit
--: No unit
---: No unit
F: Degree Fahrenheit
Same as PV
input unit
P.DP
Control PV input
decimal point
position
STD
0: No decimal place
1: One decimal place
2: Two decimal places
3: Three decimal places
4: Four decimal places
1
P.RH
Maximum value of
control PV input
range
STD
-19999 to 30000, (P.RL<P.RH), |
P.RH - P.RL | ≤ 30000
Depends on
the input type
P.RL
Minimum value of
control PV input
range
STD
Depends on
the input type
PV.HL
Input switching PV
high limit (in Loop
control with PV
switching)
STD
0.0 to 100.0% of control PV input
range (EU), (PV.HL>PV.LL)
100.0 % of
control PV
input range
PV.LL
Input switching PV
low limit (in Loop
control with PV
switching)
STD
0.0 % of
control PV
input range
PV.2C
Input switching
action (in Loop
control with PV
switching)
STD
0: Switch based on low limit of
temperature range
1: Switch using the parameter
PV.HL
2: Switch using DI
3: Switch based on high limit of
temperature range
0
PV.AS
Input computation
selection (in Loop
control with PV
auto-selector)
STD
0: Max. value
1: Min. value
2: Ave. value
3: Input 1 - Input 2
4: Input 2 - Input 1
0
PV.NU
Number of inputs (in
Loop control with
PV auto-selector)
STD
2: Use Input 1 and Input 2
3: Use Input 1, Input 2, and Input 3
4: Use 4 inputs
2
SPH SP high limit STD
0.0 to 100.0% of PV input range
(EU), (SPL<SPH)
100.0 % of PV
input range
SPL
SP low limit STD
0.0 % of PV
input range
In Cascade control, the following parameters are also displayed for secondary loop. (the LP2 lamp
is lit)
• Parameter: P.UNI, P.DP, P.RH, P.RL, SPH, SPL
18.2 List of Parameters