YOKOGAWA UTAdvanced UT55A, User Manual

Page: 425 / 476

18-14
IM 05P01C31-01EN
Tuning Menu (Menu: TUNE) (Continued from previous page)
Parameter
symbol
Name
Display
level
Setting range Initial value
MPON
Manual preset
output number
selection
STD
OFF: Hold the control output in
AUTO mode (bumpless)
1: Use manual preset output 1
(output bump)
2: Use manual preset output 2
(output bump)
3: Use manual preset output 3
(output bump)
4: Use manual preset output 4
(output bump)
5: Use manual preset output 5
(output bump)
OFF
MPO1 to
MPO5
Manual preset
output 1 to 5
STD -5.0 to 105.0% 0.0%
In Cascade control, the following parameters are also displayed for secondary loop. (the LP2 lamp
is lit)
• Parameter: MPON, MPO1 to MPO5
Zone Control Menu (Menu: ZONE)
Parameter
symbol
Name
Display
level
Setting range Initial value
RP1 to RP7
Reference point 1
to 7
STD
0.0 to 100.0% of PV input range
(EU)
(RP1 ≤ RP2 ≤ RP3 ≤ RP4 ≤ RP5 ≤
RP6 ≤ RP7)
100.0 % of PV
input range
RHY
Zone PID switching
hysteresis
STD
0.0 to 10.0% of PV input range
span (EUS)
0.5 % of PV
input range
span
RDV
Reference deviation STD
OFF: Disable
0.0 + 1 digit to 100.0% of PV input
range span (EUS)
OFF
In Cascade control, the following parameters are also displayed for secondary loop. (the LP2 lamp
is lit)
• Parameter: RP1 to RP7, RHY, RDV
P Parameter Menu (Menu: PPAR)
Parameter
symbol
Name
Display
level
Setting range Initial value
P01 to P10
P01 to P10
parameter
STD
-19999 to 30000 (Set a decimal
point position using LL50A
Parameter Setting Software.)
0
18.2 List of Parameters