YOKOGAWA TC10, Engineering Manual

Page: 28 / 36

Yokogawa Electric Corporation - TC10 - ENGINEERING MANUAL - PAG. 28
no. Param. Description
Dec.
Point
Values Default
21 o2Ac Out 2 action 0
dir = Direct action
rEU = Reverse action
dir.r = Direct with reversed LED
ReU.r = Reverse with reversed LED
dir
22 o3F Out 3 function 0
NonE = Output not used
H.rEG = Heating output
c.rEG = Cooling output
AL = Alarm output
t.out = Reserved
t.HoF = Reserved
P.End = Reserved
P.HLd = Reserved
P.uit = Reserved
P.run = Reserved
P.Et1 = Reserved
P.Et2 = Reserved
or.bo = Out-of-range or burn out indicator
P.FAL = Power failure indicator
bo.PF = Out-of-range, burn out and Power failure indicator
St.bY = Stand by status indicator
diF.1 = The output repeats the digital input 1 status
diF.2 = The output repeats the digital input 2 status
on = Out 3 always ON
riSP = Inspection requested (the worked hours/days
counter has reached the programmed threshold)
AL
23 o3AL Alarms linked up with the out 3 0
0 to 63
+1 = Alarm 1
+2 = Alarm 2
+4 = Alarm 3
+8 = Loop break alarm
+16 = Sensor Break
+32 = Overload on output 4
AL2
24 o3Ac Out 3 action 0
dir = Direct action
rEU = Reverse action
dir.r = Direct with reversed LED
ReU.r = Reverse with reversed LED
dir
25 o4F Out 4 function 0
NonE = Output not used
H.rEG = Heating output
c.rEG = Cooling output
AL = Alarm output
t.out = Reserved
t.HoF = Reserved
P.End = Reserved
P.HLd = Reserved
P.uit = Reserved
P.run = Reserved
P.Et1 = Reserved
P.Et2 = Reserved
or.bo = Out-of-range or burn out indicator
P.FAL = Power failure indicator
bo.PF = Out-of-range, burn out and Power failure indicator
St.bY = Stand by status indicator
AL
26 o4AL Alarms linked up with the out 4 0
0 to 63
+1 = Alarm 1
+2 = Alarm 2
+4 = Alarm 3
+8 = Loop break alarm
+16 = Sensor Break
+32 = Overload on output 4
AL1 +
AL2
27 o4Ac Out 4 action 0
dir = Direct action
rEU = Reverse action
dir.r = Direct with reversed LED
ReU.r = Reverse with reversed LED
dir