INSTRUCTIONS
ATOMIC
1
Page 1: ...INSTRUCTIONS ATOMIC INSTRUCTIONS 1 ...
Page 2: ...o consume current if it s still connected to batteries even if the system is turned off Long time contact will cause batteries to completely discharge and result in damage to batteries or ESC or both Features Ultra mini size easy to put on 1 28 scale RC cars Compatible with both sensored or sensorless brushless motors on the market Aluminum casing with excellent heat dissipation Various protection...
Page 3: ...motor C solder tabs 4 Connect the sensor cable to the motor if you using sensored motor 5 Connect battery wire to battery positive wire 6 Connect battery wire to battery negative wire 7 Connect the Signal cable to the receiver Motor wire A Motor wire B Motor wire C Battery wire Battery wire Signal Cable to Receiver Program Box Sensor cable LED signal Power Button ...
Page 4: ...hrottle stick at neutral position 2 Connect the battery to ESC 3 Press and hold the ESC power button until a BLUE Led light up 4 When the BLUE Led light up ESC is in Throttle Calibration mode and the neutral position is saved in the ESC 5 Move the throttle to the full throttle position then the BLUE Led will be flashing until a solid BLUE Led will be light up Light up BLUE Led represent the full t...
