YOKOGAWA EXAxt ZR22G, User Manual, Page: 127 / 211

<8. Detailed Data Setting>
8-14
IM 11M12A01-02E 16th Edition : Mar. 19, 2020-00
8.5.3 Default Values
All contact inputs are set to “No function”(disabled) prior factory shipment or after data
initialization..
8.6 Other Settings
8.6.1 Setting the Date-and-Time
The following describe how to set the date-and-time. Automatic calibration or blow back works
following this setting.
Proceed as follows:
(1) From the Basic panel display if you touch the [Setup] key, the Execution/Setup display
appears.
(2) Select “Commissioning” and the Commissioning display appears.
(3) Select “Others” and the display of Fig 8.12 appears.
(4) Select “Clock” and the display of Fig 8.13 appears.
(5) Select “Set date” and the numerical entry display appears. To enter June 21. 2004 , enter
210604. Touch the [Enter] key and you revert to the display of Fig 8.13.
(6) Select “Set time”. Enter the time in 24-hour format. To set 2:30 pm, enter 1430 on the
numerical display and touch enter. Touch the [Enter] key. The clock starts from 00 seconds..
Clock

Averaging

Fuel setup

Purging

Unit setup

Passwords

Defaults
Enter
Others
F8.12E.ai
Enter
Set date: 1 3 / 0 7 / 0 0

Set time: 1 4 : 3 9
1 3 J ul. 2 0 0 0
1 4 : 3 9 : 5 5
Clock
F8.13E.ai
Figure 8.12 Other Settings Figure 8.13 Clock Display
8.6.2 Setting Periods over which Average Values Are
Calculated and Periods over which Maximum and
Minimum Values Are Monitored
The equipment enables the display of oxygen concentration average values and maximum and
minimum values under measurement (see Section 10.1, later in this manual).
The following section describes how to set the periods over which oxygen concentration average
values are calculated and maximum and minimum values are monitored.
n
Procedure
(1) From the Basic panel display touch [Setup] key, and the Execution/Setup display appears.
(2) Select “Commissioning” and the Commissioning display appears.
(3) Select “Others” then Averaging. The display of Fig. 8.14 appears.
(4) Select “Set period over which average is calculated” and numerical entry display appears.
To set 3 hours, enter 003. Entry range is 1 to 255 hours.