YOKOGAWA Daqstation DX2000 User Manual Download Page 159

Page: 159 / 366

Switching Operation Screens

4-27

IM 04L42B01-01E

App

Index

• TAG DETAIL

The same as the TAG DETAIL setting in other displays.
The following example is for the DX2048 OVERVIEW display.

When the Tag Number Is Not Displayed (the TAG DETAIL does not appear)

Tag comments are displayed.

Tag comment

When the Tag Number Is Displayed

When TAG DETAIL is set to off, display priority is given to the tag number. If TAG

DETAIL is on, the tag number and comment are displayed as much as possible.

With TAG DETAIL OFF

With TAG DETAIL ON

Tag no.

Tag comment

4.4 Display the Statuses of All Channels on One Screen (Overview Display)

Summary of Contents for Daqstation DX2000















































































































































































































































































































































































Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands

YOKOGAWA Daqstation DX2000, User Manual

Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands