YOKOGAWA Daqstation DX2000, User Manual

Page: 170 / 366

4-38
IM 04L42B01-01E
4.9 Displaying a List of Operation Logs
Displays the following operation logs.
Login log
*1
, error log, communication log, FTP log, Web log, e-mail log, SNTP log, DHCP
log, Modbus status log, operation log
*2
, and change settings log
*2
*1 Only on DXs without the /AS1 advanced security option
*2 Only on DXs with the /AS1 advanced security option
Procedure
• Displaying the Log
1.
Press DISP/ENTER to show the display selection menu.
2.
Press the up and down arrow keys to select LOG .
* To show
LOG
on the menu, see section 5.18.
3.
Press the right arrow key to display the sub menu.
4.
Press the up and down arrow keys to select the sub menu item.
To close the menu without changing the displayed contents, press the
ESC
key.
Sub menu items are LOGIN , ERROR , COMMUNICATION , FTP , MAIL , WEB , SNTP ,
DHCP , and MODBUS .
5.
Press DISP/ENTER .
The display appears.
Explanation
• Login Log
This log is only for DXs without the /AS1 advanced security option. DXs with the /AS1
advanced security option use the operation log.
The log number of the last line and the
total number of logs
User name
Operation method (see the table below)
Operation (see the table below)
Date/time
Action Description
Login Login
Logout Logout
NewTime Time change while memory is stopped
TimeChg Time change through key operation
PowerOff Power OFF (power failure occurred)
PowerOn Power ON (recovered from a power failure)
TrevStart Start the operation of gradually adjusting the time
TRevEnd End the operation of gradually adjusting the time
TimeDST Switch the daylight savings time
SNTPtimset Time change by SNTP
TimeDST Switch to or out of daylight saving time
CCSetEnd Completion of calibration correction
CCExpire Passing of the calibration due date without calibration having been completed