YOKOGAWA Daqstation DX2000, User Manual

Page: 197 / 366

5-17
IM 04L42B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• Alarm Mark Indication
Displays marks indicating the values of the high and low limit alarms, delay high and
low limit alarms, and difference high and low limit alarms. This setting is common with
the bar graph display.
• Alarm mark > Mark kind
Settings Description Mark
Alarm The alarm mark is green under normal conditions. It changes to the
specified alarm color when an alarm occurs (release number 3 or
later; see section 3.7 for details).
or
Fixed Displays a fixed color.
• Alarm mark > Indicate on Scale
To display alarm point marks, select On .
• Alarm mark > Alarm mark color > Alarm 1, Alarm 2, Alarm 3, and Alarm 4
If the Mark kind is set to Fixed , specify the color of the alarm point marks.
If one of the colors under Alarm mark color is set to Auto , its corresponding point
mark will appear in the specified alarm color (release number 3 or later; see section
3.7 for details).
• Color Scale Band
Displays a specified section of the measurement range using a color band on the
scale. This setting is common with the bar graph display.
• Color scale band > Band area
Settings Description
In Displays the area inside using the color band.
Out Displays the area outside using the color band.
Off Disables the function.
• Color scale band > Color
Set the display color.
• Color scale band > Display position > Lower and Upper
Specify the display position. Set a value within the span or scale range.
Lower: Lower limit of the area.
Upper: Upper limit of the area.
5.8 Displaying Alarm Point Marks and Color Scale Band on the Scale