YOKOGAWA Daqstation DX2000 User Manual Download Page 295

Page: 295 / 366

10-3

IM 04L42B01-01E

Using External Input Channels (/MC1 Option)

App

Index

Setup Items

• Setting the Input

The measured values of external instruments are loaded using the Modbus client or

Modbus master function to be used as external input channel inputs.

For the setup procedure, see the

Communication Interface User’s Manual,

IM04L41B01-17E.

• First-CH/Last-CH

Select the target channels. Channel numbers are 201 to 440.

• Ext. range > On/Off

Select

to use the external input channel.

• Ext. range > Span Lower and Span Upper

  Measurement range.
  Selectable range of values: –30000 to 30000
  Decimal place: Down to four digits to the left of the decimal point

10.1 Setting External Input Channels

Summary of Contents for Daqstation DX2000















































































































































































































































































































































































Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands

YOKOGAWA Daqstation DX2000, User Manual

Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands