46
5-4 Deleting All Saved Data at Once
Deleting All Saved Data
All procedures start from normal measurement mode (see
section 2-4-1).
Confirm that the instrument is in normal measurement mode
(absolute value measruement or relative value measurement)
before beginning the procedure.
Step
Key
Display
Description
1 MEMORY
are
displayed.
The address is shown in the
ADRS field.
Changes to memory
measurement
mode.
2
MEMORY is displayed. Saved
data including the measured
values and conditions saved to
the displayed addresses.
Changes to detailed
display mode. See
saved data.
3
MEMORY
and to the lower
right of CLR, blink.
Changes to memory
deletion mode.
4 [UP]
or
[DOWN]
Changes to a blinking . Choose to delete
all.
5
ENTER
is displayed to the
lower right of .
and are displayed.
Selects all saved data
for deletion from
standard memory.
6 [UP]
or
[DOWN]
or blinks, depending
on which one was selected.
Confirms whether to
delete all
7
ENTER
Returns to the screen in which
and to the lower
right of CLR, blink.
YES: Executes the
deletion.
NO: Cancels the
deletion.
8
ESC
Returns to normal measurement
mode. Displays the measured
value.
Exits memory
deletion mode.
* For deletion of all saved data from user memory addresses U00
through U99, press the MEMORY key while holding down the ENTER
key in step 1 for user memory measurement.
Procedures thereafter are the same.
MEMORY
MEMORY
DATA
DATA
DETAIL
DETAIL
ADRS
ADRS