manualshive.com logo in svg

YOKOGAWA AQ2160-02, User Manual, Page: 12 / 73

Share
Download
YOKOGAWA AQ2160-02 User Manual Download Page 12

 

 

4

 

 

 

When using an AC power supply for this instrument, always 
use the AC adapter that came with the instrument.  Never 
use the AC adapater with any other instrument.  Doing so 
could result in damage or injury.   
=> Fire, electric shock, or malfunction can result.     

 

Do not use a power supply other than the one specified. 
Also, do not use with power supply voltages other than those 
indicated by this manual.   
=> Fire, electric shock, or malfunction can result.     

 

When connecting the instrument to commercial power, 
connect directly to a dedicated power outlet.  Do not use 
extension cords as they can overheat and cause fire.   

 

Do not bring the power cord near any hot objects. 
=> The coating on the cord can deteriorate, causing fire or 
electric shock. 

 

Do not impair, damage, or attempt to modify the power cord. 
=> Fire or electric shock can result. 

 

Never place spent batteries in fire.     
=> Explosion, fire, or burns can result.   

 

Do not insert or drop any metal objects into any openings on 
the instrument, or inside the instrument.   
=> Fire, electric shock, or malfunction can result.     

 

 

The sensor element of this instrument contains indium gallium 
arsenide (InGaAs).    InGaAs powder and vapor is dangerous. 
Therefore, never incinerate, destroy, break, grind, or apply 
chemicals to the instrument.  Keep separate from general 
industrial or household waste, and dispose of the instrument 
according to relevant local laws.     

 

 

 

 

 

DANGER

 

Summary of Contents for AQ2160-02










































































Reviews:

No comments