YG125-30B
Maintenance Manual
Lubrication system
19
Oil Pump
In case of failure, the oil pump needs to be removed for repair or replacement.
This section includes the following contents:
Steps and illustration for oil pump removal;
Steps and illustration for oil pump installation;
Disassembly and assembly of oil pump, etc.
Steps for oil pump removal:
1.
Remove the oil drain plug to drain the engine oil
inside the crankcase.
2.
Loosen the right crankcase cover connecting bolts to
detach the right crankcase cover components.
3.
Use the clutch push rod extractor
to
remove the clutch push rod assembly; use the fixing
tool
to prevent the clutch and the primary
driving gear from rotating; loosen the nut to remove
the clutch component,
4.
Remove the oil pump
。
Remove the oil pump
Summary of Contents for YG125-30B
Page 99: ...YG125 30B Maintenance Manual Frame and exhaust system 106 10 Frame and exhaust system...
Page 130: ...YG125 30B Maintenance Manual Illumination signal system 136 Circuit schematic drawing...
Page 141: ...YG125 30B Maintenance Manual Engine management system 147 Circuit schematic drawing...
Page 151: ...YG125 30B Maintenance Manual Electrical System Diagram 157 19 Electrical System Diagram...
