Yingang YG125-30B, Manual

Page: 66 / 151

YG125-30B Maintenance Manual Clutch and Right crankcase cover
71
Oil filter cover
Right crankcase cover
Right crankcase cover
To remove the cylinder head cover:
1. Remove the oil drain plug to drain the engine oil
inside the crankcase.
2. Separate the clutch control line with the clutch
operating lever
3. Remove the oil filter cover.
4. Remove the right crankcase cover connecting bolt
5. Take out the right crankcase cover component.
6. Take out the right crankcase cover sealing paper
gasket
To install the right crankcase cover:
1. Confirm the location pin; clean up the residual
sealing paper gaskets on the right crankcase and
right crankcase cover.
2. Replace with a new right crankcase cover sealing
paper gasket.
3. Mount the right crankcase cover.
4. Mount the oil filter cover.
Clutch operating lever
Right crankcase cover
Waste engine oil flow into the oil
Clean up the seal surface