Yingang YG125-30B, Manual, Page: 112 / 151

YG125-30B Maintenance Manual Front wheel, front suspension device and steering stem
118
Unscrew the upper / lower connection plate bolt and. the
direction of the tube bolt
Pull off the front damper
To install the front fork:
Installation is in the reverse order of removal.
Notice
While removing the front brake caliper, if it is
unnecessary to replace, never nip the front brake
handle. While installing the front brake caliper, apply
the thread retaining adhesive LOCTITE 243, with the
tightening torque being 20-30N.m
Check
1) Dismantle oil drain bolt and check bolt whether or
not is loose.
2) Drain off absorber oil and check quality whether or
not is turned.
3) Take off dust sleeve, circlip and oil seal to check
edge whether or not is worn and circlip is distorted.
4) Oil seal assembly: in primary lip and the dust lip
between coated with lubricating grease, oil seal
mark up
5) Check inner pipe whether or not is worn.
Bolt
Remove oil bolt
Shock absorber spring
Oil seal
Circlip