Yingang YG125-30B, Manual, Page: 102 / 151

YG125-30B Maintenance Manual Frame and exhaust system
108
Headlamp dimming
Before driving, check the brightness, direction, etc. of the
headlamp.
The adjustment can be made to the headlamp in the left /
right and vertical directions.
l
Loose the screw to disassemble the headlight.
l
Rotating , directly unplugging
l
Rotating and disassemble the bulb.
l
Install the new bulb in reverse order
Headlight bulb 12V55W
Position lamp bulb
l
Unplugging the sidelight seat
l
Unplugging the sidelight bulb
Replacement of turn lamp bulb
l
Loosen the screws, remove the lamp lampshade
l
Lightly press bulb, rotate in counter-clockwise.
l
Install new bulb in opposite order as below.
Front and rear lamp bulb12V10W
Taillight
、
Taillight bulb
l
Loosen the screws, remove the taillight lampshade
l
Lightly rotate taillight seat, take out the seat and
bulb.
l
Lightly press bulb, rotate in counter-clockwise.
l
Install new bulb in opposite order as below.
Taillight bulb ： 12V21/5W
Removal / installation of exhaust muffler
To remove the exhaust muffler:
l
Park the motorcycle on the plane ground with main
stand; pull off the oxygen sensor patch plug.
Screw
Taillight lampshade
Bulb
Adjusting bolt