YILMAZ DC 550, Operator'S Manual

Page: 125 / 187

11. MAINTENANCE, SERVICE AND REPAIR 124
11.3 Replacing the Motor Belt

Remove the bolt that fastens the belt housing cover and remove the cover.

Loosen the motor mounting screws by using a wrench.

After the motor mounting screws are loosened, tension of the belt will be reduced by moving the
motor forwards or backwards and then the belt will be removed.

Install a new belt in place of one that you have removed.

After installing the new belt, tighten the tensioning spindle by turning it clockwise by using a no. 8
allen wrench and tension the belt.

Retighten the motor screws after tensioning the belt ( FIGURE – 49 )

Finally,complete belt replacement operation by fastening the belt housing cover
Belt Protection
Cover Screw
FIGURE – 48
Motor Mounting
Screw
FIGURE – 49
FIGURE – 50
Belt
Tesioning
Spindle