YILMAZ DC 550, Operator'S Manual

Page: 98 / 187

7. OPERATION 97

The length and angle values in the list come from the list.
 Go to the meter button on the panel or send the machine to the meter with the
button on the screen.

After the machine has arrived, the profile is placed, the motors are started and the cut is made with
the double hand start button.
 When cutting is done, the color of this button becomes green. The buttons of undesired
profiles can be manually deactivated so that the next line is skipped automatically when the list is
reached.
 All data interrupted by the data reset button is reset and the operation is resumed
by removing the cut off sign.
If manual switching is active, each profile in the list is cut off, the operator
selects the next profile by itself and sends it manually to the measurement. Which one is green is active.
For example, in the illustration, the manual transition is active. If a mode is desired to be activated, that
button is pressed and activated.
If automatic switching is active, the machine will automatically go to the next
measurement in the list after each profile cut is completed and wait for the cut to be made. Here the
operator does not need to send the machine by hand.