Yealink T5 Series, Administrator'S Manual

Page: 171 / 472

Account Settings
165
Values
Default Blank
Web UI Account->Register->SIP Server Y->Server Host
Phone UI Settings->Advanced Settings (default password: admin) ->Network->802.1x->802.1x Mode
Parameter
account.X.sip_server.Y.port
[1][2]
<MAC>.cfg
Description
It configures the port of SIP server Y.
If it is set to 0 when UDP is used ("account.X.sip_server.Y.transport_type" is set to 0), the phone uses a ran-
dom port for responding the messages from the server.
Permitted
Values
Integer from 0 to 65535
Default 5060
Web UI Account->Register->SIP Server Y->Port
Parameter
account.X.outbound_proxy_enable
[1]
<MAC>.cfg
Description It enables or disables the phone to send requests to the outbound proxy server.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
Web UI Account->Register->Enable Outbound Proxy Server
Phone UI Settings->Advanced Settings (default password: admin) ->Accounts->Outbound Status
Parameter
account.X.outbound_proxy.Y.address
[1][2]
<MAC>.cfg
Description
It configures the IP address or domain name of the outbound proxy server Y.
Note : It works only if “account.X.outbound_proxy_enable” is set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default Blank
Web UI Account->Register->Outbound Proxy Server Y
Phone UI Settings->Advanced Settings (default password: admin) ->Accounts->Outbound ProxyY
Parameter
account.X.outbound_proxy.Y.port
[1][2]
<MAC>.cfg
Description
It configures the port of the outbound proxy server Y.
Note : It works only if “account.X.outbound_proxy_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 65535
Default 5060
Web UI Account->Register->Outbound Proxy Server Y->Port
Parameter
account.X.reg_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) at which the phone to retry to re-register account X when regis-
tration fails.