Yealink T5 Series Administrator'S Manual Download Page 74

Page: 74 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones

Permitted

Values

Time from 00:00 to 23:59

Default

00:00

Web UI

Settings->Auto Provision->Time

Parameter

static.auto_provision.flexible.enable

<y0000000000xx>.cfg

Description

It triggers the flexible feature to on or off.

Note

: The day within the period is based upon the phone's MAC address and does not change with a

reboot, whereas the time within the start and end is calculated again with every reboot.

Permitted

Values

-Off

-On, the phone performs auto provisioning at random between a starting time configured by the para-

meter "static.auto_provision.flexible.begin_time" and an ending time configured by the parameter "stat-

ic.auto_provision.flexible.end_time" on a random day within the period configured by the parameter

"static.auto_provision.flexible.interval".

Default

Web UI

Settings->Auto Provision->Flexible Auto Provision

Parameter

static.auto_provision.flexible.interval

<y0000000000xx>.cfg

Description

It configures the interval (in days) for the phone to perform auto provisioning.

The auto provisioning occurs on a random day within this period based on the phone's MAC address.

The phone performs auto provisioning on a random day (for example, 18) based on the phone's MAC

address.

Note

: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).

Permitted

Values

Integer from 1 to 1000

Default

Web UI

Settings->Auto Provision->Flexible Interval Days

Parameter

static.auto_provision.flexible.begin_time

<y0000000000xx>.cfg

Description

It configures the starting time of the day for the phone to perform auto provisioning at random.

Note

: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).

Permitted

Values

Time from 00:00 to 23:59

Default

02:00

Web UI

Settings->Auto Provision->Flexible Time

Parameter

static.auto_provision.flexible.end_time

<y0000000000xx>.cfg

Description

It configures the ending time of the day for the phone to perform auto provisioning at random.

If it is left blank or set to a specific value equal to starting time configured by the parameter “static.auto_

provision.weekly.begin_time”, the phone performs auto provisioning at the starting time.

If it is set to a specific value greater than starting time configured by the parameter “static.auto_pro-

vision.weekly.begin_time”, the phone performs auto provisioning at random between the starting time

and ending time.

Summary of Contents for T5 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for T5 Series

Reviews:

Related manuals for T5 Series

Brands by name

Popular brands

Yealink T5 Series, Administrator'S Manual

Search results

Summary of Contents for T5 Series

Reviews:

Related manuals for T5 Series

Brands by name

Popular brands