Yealink T5 Series, Administrator'S Manual

Page: 224 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
218
Parameter account.X.dialplan.digitmap.interdigit_long_timer
[1]
<MAC>.cfg
Description
It configures the time (in seconds) to wait before dialing an entered number if it matches part of any
string of the digit map for the account X.
If it is set to 0, the phone will not dial the entered number if it only a partial match exists.
The value of this parameter should be greater than that configured by the parameter “accoun-
t.X.dialplan.digitmap.interdigit_short_timer”.
For example:
account.1.dialplan.digitmap.string = 1xxT|xxxxx<T1>
account.1.dialplan.digitmap.interdigit_long_timer = 10
account.1.dialplan.digitmap.interdigit_short_timer = 5
When you enter 1, it matches part of two-digit maps, the phone tries to wait 10 seconds and then dials
out 1 if no numbers entered;
When you enter 15, it also matches part of two-digit maps, the phone tries to wait 10 seconds and then
dials out 15 if no numbers entered;
When you enter 153, it also matches part of two-digit maps, the phone tries to wait 10 seconds. But after
waiting for 5 seconds, it completely matches the first digit map and then immediately dials out 153.
Note : It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.interdigit_long_timer” takes precedence over that configured
by the parameter “dialplan.digitmap.interdigit_long_timer”.
Permitted
Values
Integer from 0 to 255
Default Blank
Parameter
account.X.dialplan.digitmap.interdigit_short_timer
[1]
<MAC>.cfg
Description
It configures the timeout interval (in seconds) for any string of digit map.
The phone will wait this many seconds before matching the entered digits to the dial plan and placing the
call.
Note : It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.interdigit_short_timer” takes precedence over that configured
by the parameter “dialplan.digitmap.interdigit_short_timer”.
Permitted
Values
Single configuration (configure a specific value for the timer letter “T” for all strings with “T” of the digit
map)
Example :
account.1.dialplan.digitmap.interdigit_short_timer = 5
If “dialplan.digitmap.string” is set to <[2-9]x:86>3.T|0T, the phone will wait 5 seconds before matching the
entered digits to this dial plan and placing the call.
Distribution configuration (configure a string of positive integers separated by “|” for each string of the
digit map in the corresponding position)
If there are more digit maps than timeout values, the last timeout is applied to the extra digit map. If there
are more timeout values than digit maps, the extra timeout values are ignored.