Yealink T5 Series, Administrator'S Manual

Page: 237 / 472

Call Features
231
Phone UI Settings->Features->Anonymous->Line X->Off Code
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Call Number Filter
Call number filter feature allows IP phone to filter designated characters automatically when dialing.
Topic
Call Number Filter Configuration
Call Number Filter Configuration
The following table lists the parameter you can use to configure call number filter.
Parameter features.call_num_filter <y0000000000xx>.cfg
Description
It configures the characters the phone filters when dialing.
If the dialed number contains configured characters, the phone will automatically filter these characters
when dialing.
Example :
features.call_num_filter = -
If you dial 3-61, the phone will filter the character - and then dial out 361.
Note : If it is left blank, the phone will not automatically filter any characters when dialing.
Permitted
Values
String within 99 characters
Default ?,-( )
Web UI Features->General Information->Call Number Filter
IP Address Call
You can set the phone whether to receive or place an IP call. You can neither receive nor place an IP call if you disable
this feature.
Topic
IP Address Call Configuration
IP Address Call Configuration
The following table lists the parameter you can use to configure IP address call.
Parameter features.direct_ip_call_enable <y0000000000xx>.cfg
Description
It enables or disables to allow IP address call.
Note : If you want to receive an IP address call, make sure “sip.trust_ctrl” is set to 0 (Disabled).
Permitted
Values
0 -Disabled
1 -Enabled
Default 1