Yealink T5 Series, Administrator'S Manual

Page: 216 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
210
The digit 0 stands for all lines. If it is left blank, the dial-now rule will apply to all lines on the phone.
Note : Multiple line IDs are separated by commas. It works only if “dialplan.digitmap.enable” and “accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
0 to 16 (for T58V/T58A/T56A)
0, 1 (for CP960)
Default Blank
Web UI Settings->Dial Plan->Dial Now->Account
Parameter phone_setting.dialnow_delay <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the phone will automatically dial out the
entered number after the designated delay time.
If it is set to 0, the phone will automatically dial out the entered number immediately.
Note : It works only if the values of the parameters “dialplan.digitmap.enable” and “accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
Integer from 0 to 14
Default 1
Web UI Features->General Information->Time Out for Dial Now Rule
Parameter dialplan_dialnow.url <y0000000000xx>.cfg
Description
It configures the access URL of the dial now template file.
For customizing dial now template file, refer to Dial Now File Customization .
Note : It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 511 characters
Default Blank
[1]
X is from 1 to 100.
Area Code Configuration
The following table lists the parameters you can use to configure area code.
Parameter dialplan.area_code.code <y0000000000xx>.cfg
Description
It configures the area code to be added before the entered numbers when dialing out.
Note : The length of the entered number must be between the minimum length configured by the para-
meter “dialplan.area_code.min_len” and the maximum length configured by the parameter “dialplan.area_
code.max_len”. It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are
set to 0 (Disabled).
Permitted
Values
String within 16 characters