Yealink SIP-T41S, User Manual, Page: 151 / 253

Basic Call Features
139
You can also perform a blind transfer to an existing call. On the
SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, make sure that the
Allow Trans Exist Call
is
enabled before performing a blind transfer to another existing call. For more information, refer
to
Enabling Allow Trans Exist Call
.
Procedure:
1.
Press the TRANSFER key or
Transfer
(
Trans
) during a call.
2.
Select the desired hold call you want to transfer the call to.
The call is then connected to the call to which you are transferring.
Performing a Semi-attended/Attended Transfer
Procedure:
1.
Press the TRANSFER key or
Transfer
(
Trans
) during a call.
2.
You can do one of the following:
-
Enter the number you or select a contact from the placed call list want to transfer the
call to.
- Press
Directory
(
Dir
). Select a desired contact from the Directory list(s).
On the SIP-T48S/T48G IP phone, tap the
Directory
or
History
. Tap the desired
contact.
3.
Press the OK key, # key or
Send
to dial out.
4.
Press the TRANSFER key or
Transfer
(
Trans
) to perform a semi-attended transfer when you
hear the ring-back tone, or perform an attended transfer after the party answers the call.
If you are using a handset, the transfer can be completed by hanging up the handset.
From the Calls screen or Transfer to screen, you can also use a Transfer key (refer to Configuring
a Transfer Key ), BLF/BLF List key (refer to Configuring a BLF Key / Configuring BLF List Settings ) or
Speed Dial key (refer to Placing a Call Using a Speed Dial Key ) to perform
semi-attended/attended transfer to the pre-defined number directly. Before performing a
semi-attended/attended transfer using these keys, make sure that the Transfer Mode via Dsskey
is configured as
New Call
or
Attended Transfer
. For more information on how to configure it,
refer to Configuring Transfer Mode via Dsskey .
Downloaded from ManualsNet.com search engine