ENGLISH PAGE 47
DESIGN
YA701 - USING YOUR RECEIVER
Once you have connected your ZONE 2 RIGHT speaker to the BR output of your YA701 and your ZONE 2 LEFT speaker
to the BL output of your YA701, you need to activate zone 2 functions. See 1.1.2 below for more details.
3.1.2 - Connecting a power amplifier
Connecting a power amplifier (or an integrated amplifier) to your zone 2 PREOUT is another way to do a multi-room
system. YA701 will act as a preamplifier to your zone 2 amplifier, allowing you to select some audio content located in
your main zone as well as to control the volume.
Note that if you already have 7 speakers in your main room, this is the only way to perform multi-room audio.
Connect the RIGHT Z2 OUTPUT of your YA701 (Red) to one of the
RIGHT LINE INPUT of your Z2 amplifier.
Connect the LEFT Z2 OUTPUT of your YA701 (White) to one of the
LEFT LINE INPUT of your Z2 amplifier.
3.1.3 - Connecting a IR receiver
If you want to control your YA701 from the second zone, you need to connect a IR receiver to the IR IN located on the
back panel. See page 13 for full details.
3.2) HOW TO TELL YOUR YA701 THAT YOU WANT TO USE ZONE 2 FEATURES ?
You need to tell your YA701 that you want to use zone 2 features. You can do this easily using the OSD (see page 33 for
more details) or from the front panel by going to the SET MENU (see 1.1 page 16
for more details).
If ever you have connected an IR receiver so you can control your YA701 from the second room, also make sure that
zone 2 is indicated. You can do this easily using the OSD (see page 36 for more details) or from the front panel by go-
ing to the SET MENU (see 8.1 page 25
for more details).
3.3) ZONE 2 FEATURES AND LIMITATIONS
Whatever the type of connection you are using (speakers connected to the BL and BR outputs of your YA701 or an am-
plifier connected to the ZONE 2 PREOUT), you will be able to :
•
Adjust the volume
•
Change the active audio source
•
Change the active video source on the C2 output. For more details about video limitations please refer to
the Video section on page 10.
However, a few limitations apply :
•
Stereo only
Stereo only
Stereo only
Stereo only : whatever the content sent to your YA701 (for example a 5.1 Dolby disc), your zone 2 will pro-
vide you with a stereo down-mixed content.
•
Tuner
Tuner
Tuner
Tuner : it is not possible to select different radio frequencies between the main zone and zone 2. It means
that if you select TUNER as active audio source for ZONE 2, the tuner frequency you will listen to is the one
selected in the MAIN ZONE. However you can change the active tuner memory (of Z1 and Z2) from zone 2
Summary of Contents for YA701
Page 54: ...ENGLISH PAGE 54 DESIGN ...