YBA DESIGN YA701 User Manual Download Page 12 | Manualshive

Page: 12 / 54

background image

ENGLISH PAGE 12

DESIGN

TUNER ANTENNA

TUNER ANTENNA

TUNER ANTENNA

TUNER ANTENNA

AM and FM antenna provided with your YA701 should be convenient in most cases.

However, for a better reception quality we suggest you to use a roof aerial or an amplified antenna.

1. Connect an AM antenna to the AM input of your YA701.

2. Connect an FM antenna to the FM input of your YA701. Be sure only to use a 75 ohms model.

HOME AUTOMATION

HOME AUTOMATION

HOME AUTOMATION

HOME AUTOMATION

CONNECTING THE TRIGGERS

Note :

Note :

Note :

Note : One device can be controlled by each of the 2 trigger outputs (T1 and T2) of your YA701. Do not connect more
than one device to each trigger output. Your YA701 can also be controlled by the trigger input (T IN). Trigger outputs
can be allocated so you can decide which source will activate each of your trigger outputs (see p26 and p36). You need
to use cables with 3,5mm mini-jack mono connectors.

Trigger outputs (T1 and T2):

-

Connect a trigger cable (not supplied with your YA701) to the trigger input of the 1

st

device you want to control

with your YA701. Then connect the other end of the trigger cable to the T1 output of your YA701

.

-

Connect a trigger cable (not supplied with your YA701) to the trigger input of the 2

nd

device you want to control

with your YA701. Then connect the other end of the trigger cable to the T2 output of your YA701

.

YA701 - CONNECTING / OTHERS

!!!!

Make sure your YA701 is in OFF position : ON/OFF button set to OFF and power status led

Make sure your YA701 is in OFF position : ON/OFF button set to OFF and power status led

Make sure your YA701 is in OFF position : ON/OFF button set to OFF and power status led

Make sure your YA701 is in OFF position : ON/OFF button set to OFF and power status led
is not red. If you have any doubt, unplug the AC cable from the power inlet.

is not red. If you have any doubt, unplug the AC cable from the power inlet.

is not red. If you have any doubt, unplug the AC cable from the power inlet.

is not red. If you have any doubt, unplug the AC cable from the power inlet.

Take a closer look at your YA701 HOME AUTOMATION SECTION

IR IN input

RS-232 connector

Trigger output 1

Trigger output 2

Trigger input

!!!!

Caution : do not plug or unplug trigger cables while one of the devices is powered ON. Al-

Caution : do not plug or unplug trigger cables while one of the devices is powered ON. Al-

Caution : do not plug or unplug trigger cables while one of the devices is powered ON. Al-

Caution : do not plug or unplug trigger cables while one of the devices is powered ON. Al-
ways switch OFF all devices before plugging or unplugging any cable.

ways switch OFF all devices before plugging or unplugging any cable.

ways switch OFF all devices before plugging or unplugging any cable.

ways switch OFF all devices before plugging or unplugging any cable.

«
...
10
11
12
13
14
...
»

Summary of Contents for YA701























































Reviews:

No comments

Related manuals for YA701

Brand: Barlow Wadley Pages: 13

Brand: Watkins Johnson Pages: 9

Brand: Spektrum Pages: 19

Micro Link 49085D

Brand: Xantech Pages: 4

Brand: MIRPO Pages: 8

Brand: Yaesu Pages: 88

Brand: Ross Pages: 36

Brand: B&K Pages: 88

AyrMesh ReceiverC

Brand: AYRSTONE Pages: 6

Brand: e+p Pages: 12

Brand: Yaesu Pages: 20

Brand: Magnadyne Pages: 12

MusicFly i-Select

Brand: DNT Pages: 48

EL-4KHDBT-RX-40-IRS

Brand: Elan Pages: 12

Brand: Daewoo Pages: 30

Brand: Accessmatic Pages: 19

Brand: Roadstar Pages: 21

Brand: CYP Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands