ENGLISH PAGE 28
DESIGN
We recommend to set the crossover frequency at least 10Hz above the lowest frequency your FRONT speakers (FL
and FR) can reproduce cleanly.
The goal is to not accentuate, or bump, the frequencies around the crossover value, but to get at a good balance
between your front speakers and your subwoofer. Also note that apart on small satellite systems, it is advised to
prefer crossover setting below 120Hz so that the subwoofer frequencies are not directional. However, with some
satellite systems or to match your room and listening taste, you may find that you have to set the crossover to higher
values.
Note that 2 crossover frequencies are set as default (SEE Step 1.4 on page 19) :
-
80 Hz when you choose MEDIUM speakers
-
120 Hz when you choose SMALL speakers
To adjust the crossover frequency, go to the
SET
SET
SET
SET
menu, then
MORE
MORE
MORE
MORE
, then
NEXT
NEXT
NEXT
NEXT
and select
BASS MODE
BASS MODE
BASS MODE
BASS MODE
.
The following question appears :
Select the crossover frequency
Select the crossover frequency
Select the crossover frequency
Select the crossover frequency
The display will also indicate current value.
Use the
and
----
to change the value of the CROSSOVER. You can select a value from 20 Hz to 250 Hz.
When you have selected the correct value, press
OK
OK
OK
OK
to access to the BASS MODE menu
8.4.2
–
Choosing the correct BASS MODE
Once you have adjusted the CROSSOVER, your YA701 will ask you :
Select the bass management mode
Select the bass management mode
Select the bass management mode
Select the bass management mode
The display will also indicate current BASS MODE
Use the
and
----
to change the type of the BASS MODE. You can select from one of the following modes.
When you have selected the correct mode, press
OK
OK
OK
OK
to save and exit.
YA701 - SYSTEM SETUP USING THE FRONT PANEL
Summary of Contents for YA701
Page 54: ...ENGLISH PAGE 54 DESIGN ...