YBA DESIGN YA701, User Manual

Page: 29 / 54

ENGLISH PAGE 29
DESIGN
STEP 8.5
–
NOISE TEST
From the
SET SET SET SET
menu, press
MORE MORE MORE MORE
, then
NEXT NEXT NEXT NEXT
and select
NOISE TEST NOISE TEST NOISE TEST NOISE TEST
.
The NOISE TEST allows you to check that all your speakers are correctly connected and activated. Press
NOISE NOISE NOISE NOISE
TEST TEST TEST TEST
and your YA701 will play a test tone (of approximately 3 seconds) on each activated speaker while displaying the
name of the speaker on the front screen. The test tone is played according to the following sequence : FL FR C
SL SR BL BR SW and back to FL.
Press
BACK BACK BACK BACK
to stop the test tone sequence.
Your setup is now complete. We recommend to use one of the four user profiles to save your setup so that you can
Your setup is now complete. We recommend to use one of the four user profiles to save your setup so that you can Your setup is now complete. We recommend to use one of the four user profiles to save your setup so that you can
Your setup is now complete. We recommend to use one of the four user profiles to save your setup so that you can
easily reload desired settings. Pease refer to USER MODE section of this manual which details this feature.
easily reload desired settings. Pease refer to USER MODE section of this manual which details this feature. easily reload desired settings. Pease refer to USER MODE section of this manual which details this feature.
easily reload desired settings. Pease refer to USER MODE section of this manual which details this feature.
YA701 - SYSTEM SETUP USING THE FRONT PANEL
BASS MODE
BASS MODE BASS MODE
BASS MODE What you tell your YA701 to do :
What you tell your YA701 to do : What you tell your YA701 to do :
What you tell your YA701 to do :
NO By selecting this mode, you tell your YA701 to ignore the LFE signal and not to send frequen-
cies below the CROSSOVER level to the subwoofer PREOUT.
LFE This is the most common mode in a 5.1 (or 6.1 / 7.1) system with LARGE speakers when a sub-
woofer is connected to your YA701. If you select the LFE mode, your YA701 will direct the LFE
channel of your Dolby or DTS content to the subwoofer output. Your YA701 will not re-direct
the frequencies below the CROSSOVER to the subwoofer PREOUT.
FRONTMIX By selecting this mode, you tell your YA701 to redirect the LFE channel content (if present) to
the FL+C+FR speakers. FL and FR speakers will each receive 40% of the LFE content while the
C speaker will receive the remaining 20%.
This mode is advisable with LARGE or MEDIUM speakers when you do not connect a sub-
woofer.
LFE AND
CROSSOVER
By selecting this mode, you tell your YA701 to generate a subwoofer signal containing a remix
of the LFE content (if present) and of the frequencies below the CROSSOVER and to direct this
signal to the subwoofer preout.
This mode is advisable with SMALL speakers.
LFE OR
CROSSOVER
By selecting this mode, your tell your YA701 to :
•
direct the LFE signal to the subwoofer when a LFE signal is encoded in the audio
content (for example on Dolby Digital or DTS discs)
•
or to send to the subwoofer the frequencies below the CROSSOVER value
This mode is advisable with MEDIUM speakers.