YBA DESIGN YA701, User Manual

Page: 36 / 54

ENGLISH PAGE 36 DESIGN
and
TRIGGER 1 (AND TRIGG
TRIGGER 1 (AND TRIGG TRIGGER 1 (AND TRIGG
TRIGGER 1 (AND TRIGGER 2
ER 2 ER 2
ER 2) :
select this line and choose the sources which are connected to your
trigger outputs. Use the
RIGHT
RIGHT RIGHT
RIGHT
and
LEFT
LEFT LEFT
LEFT
arrows on your remote control to change the source associated with the
1st trigger (T1). Once you are done, repeat this operation for the second trigger (T2). You can allocate the two triggers
to the same source. This function is more detailed in section 8.2 (page 26).
VIDEO STANDARD
VIDEO STANDARD VIDEO STANDARD
VIDEO STANDARD
: select this line and using the
RIGHT
RIGHT RIGHT
RIGHT
and
LEFT
LEFT LEFT
LEFT
arrows choose between
PAL
PAL PAL
PAL
and
NTSC
NTSC NTSC
NTSC
according to your local video standard. PAL is the standard in most European or Asian countries whereas NTSC is the
standard in the USA, Japan and other countries. Note :
Note : Note : Note : if your display device only support one of the two standard (for
example PAL), while switching to the other standard (for example NTSC) you may not be able to see the OSD anymore.
If so you will need to change the video standard from the front panel (see section 3 page 21).
LIPSYNC
LIPSYNC LIPSYNC
LIPSYNC :
Select this line to adjust the LipSync delay. The LipSync function of your YA701 allows you to perfectly
synchronize audio and video content. You can select a value from 0 to 30 ms. This function is fully detailed in step 8.3
(page 26).
IR IN IR IN IR IN IR IN :
Select this line and choose between
Z1 Z1 Z1 Z1
and
Z2 Z2 Z2 Z2
so your YA701 will know how to handle the infrared
remote control instructions it receives from an IR repeater connected to the IR IN one the back panel :
•
If you have connected an IR receiver to the IR IN of your YA701 in order to control it from your Z2, you
shall make sure that
Z2
Z2 Z2
Z2
is indicated
•
If you have connected the IR receiver to the IR IN of your YA701 on the front panel because the IR receiver
of your YA701 is not visible (for example, your YA701 staying in a rack), you should select
Z1
Z1 Z1
Z1
.
This function is detailed in section 8.1 (page 25).
NAME EDIT
NAME EDIT NAME EDIT
NAME EDIT :
select this line and press
OK
OK OK
OK
to access the NAME EDIT menu. This menu allows you to tell your
YA701 what type of device is connected to his inputs and outputs. You will access 4 pages : one page for ANALOG
audio assignment, one page for DIGITAL audio, two pages for VIDEO (the second page also being for video outputs
assignment).
The following names are available for your selection : TV, DVD, DVD2, CAM, VCR, SAT, SAT2, GAME, GAME 2, PC,
MEDIA CENTER, CD, SACD, MD, TAPE, PHONO, EXT. TUNER, BLUE RAY, HD-DVD, AUX1, AUX2, IPOD, PLASMA, LCD,
PROJECTOR, PS 2/3 and XBOX.
Use the
RIGHT RIGHT RIGHT RIGHT
and
LEFT LEFT LEFT LEFT
arrows to change the input name to match the devices you have connected to input A1.
Use the
UP
UP UP
UP
and
DOWN
DOWN DOWN
DOWN
arrows to change of input and to browse between the four pages. Press
BACK
BACK BACK
BACK
to save, exit
and return to the EXPERT MODE. Press
NEXT NEXT NEXT NEXT
to go to next page.
YA701 - SYSTEM SETUP USING THE OSD
N A M E E D I T 1 / 4 A N A L O G
A 1 m e d i a - c
A 2 - - -
A 3 - - -
A 4 - - -
A 5 - - -
A 6 - - -
N e x t B a c k