YBA DESIGN YA701, User Manual

Page: 25 / 54

ENGLISH PAGE 25
DESIGN
STEP 8
STEP 8 STEP 8
STEP 8 ---- EXPERT SETUP
EXPERT SETUP EXPERT SETUP
EXPERT SETUP
The EXPERT SETUP menu lets you access to additional setup functions such as sound and image synchronization (Lip
Sync), triggers assignment, infra-red repeater configuration (IR IN), crossover frequency and bass mode.
Before entering the EXPERT SETUP we highly recommend to use one of the USER profiles to store your setup so you
can easily reload previous settings if ever someone modifies them or if you ever make an unwanted change.
Go to
USER
USER USER
USER
and hold any of the presets P1 to P4 during 3 seconds. The message
“
Px stored
”
will confirm a correct
operation.
Once you have stored your current settings, from the
SET
SET SET
SET
menu, press
MORE
MORE MORE
MORE
, then
NEXT
NEXT NEXT
NEXT
.
The following menu appears :
STEP 8.1
–
IR IN
This button lets you tell your YA701 how to handle the infrared remote control instructions it receives from an
external IR receiver :
•
If you have connected a IR receiver to the IR IN of your YA701 in order to control it from your second zone,
make sure that
Z2 Z2 Z2 Z2
is indicated below IR IN (default setting).
•
If you have connected the IR receiver to the IR IN of your YA701 on the front panel because the IR receiver of
your YA701 is not visible (for example, your YA701 placed in a closed rack), you should select
Z1 Z1 Z1 Z1
.
Note :
Note : Note :
Note : if you have no IR receiver connected to the IR IN of your YA701, just ignore this step.
YA701 - SYSTEM SETUP USING THE FRONT PANEL