4.5 Accessing the web server via Ethernet
On delivery the EtherCAT coupler has no IP address. To be able to access the EtherCAT
coupler via EoE, you have to assign data to this IP address. The following options in the
SPEED7 EtherCAT Manager are available:
Configuration - slave station - Ethernet (EoE)
n
Port Mode:
–
Switch Port (is not supported)
–
IP Port
n
Overwrite IP Settings:
–
IP Address
–
Subnet Mask
–
Default Gateway
–
DNS Server (is not supported)
–
DNS Name (is not supported)
4.5.1 Web server
The activation is carried out via the Command object 0x2000 (Default: deactivated).
Ä
‘Command’ page 81
Procedure
n
Use
Parameter
(object 0x2000:02) to determine whether the web server is enable
("1") or disable ("0"),
n
use
Execute Command
(object 0x2000:01) to issue the command 0x00008001 (Set
web server state),
n
Status
(object 0x2000: 03) indicates whether the command was executed success-
fully or incorrectly.
–
1: command executed
–
2: command not executed
–
3: command unknown
–
4: command not executable in this state
The setting is saved remanently.
Access via Ethernet (EoE)
Activate / deactivate web
server
VIPA System SLIO
Deployment
Accessing the web server via Ethernet > Web server
HB300 | IM | 053-1EC01 | en | 18-49
66
