5.9 n: Special Adjustments
YASKAWA ELECTRIC
SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual
211
P
a
ra
me
te
r D
eta
ils
5
■
n8-76: Id Filter Time (for PM OLV)
Sets Id filter time for PM OLV control mode.
Note:
This parameter is valid from software version 6002 or later.
■
n8-77: Id Load Slp End (for PM OLV)
Sets Id current level for high loads.
Note:
This parameter is valid from software version 6002 or later.
■
n8-78: Id Medium Value (for PM OLV)
Sets Id current level for medium loads.
Note:
This parameter is valid from software version 6002 or later.
■
n8-87: Output Voltage Limit Selection
Sets how the output voltage limit should be used. This setting is rarely needs to be changed.
Note:
This parameter is valid from software version 6002 or later.
0: Feedback type
1: Feed Forward type
■
n8-88: Output Voltage Limit Switch Current Level
Sets the current level to switch the output voltage limit sequence. Set as a percentage of the motor rated current (E5-03).
This setting is rarely needs to be changed.
Note:
This parameter is valid from software version 6002 or later.
■
n8-89: Output Voltage Limit Switch Hysteresis Width
Sets hysteresis used for the current level that switches the output voltage limit sequence. Set as a percentage of the motor
rated current (E5-03). This setting is rarely needs to be changed.
Note:
This parameter is valid from software version 6002 or later.
■
n8-90: Output Voltage Limit Switch Speed
Sets the speed level for switching the output voltage limit sequence. Set as a percentage of the maximum output
frequency (E1-04). This setting is rarely needs to be changed.
Note:
This parameter is valid from software version 6002 or later.
No.
Name
Setting Range
Default
n8-76
Id Filter Time
0 to 5000 ms
200 ms
No.
<1> Setting range is determined as follows: (n8-50 + 0.1%) to 250.0%.
Name
Setting Range
Default
n8-77
Id Load Slp End
90.0%
No.
Name
Setting Range
Default
n8-78
Id Medium Value
-200.0 to 200.0%
0.0%
No.
Name
Setting Range
Default
n8-87
Output Voltage Limit Selection
0, 1
0
No.
Name
Setting Range
Default
n8-88
Output Voltage Limit Switch Current Level
0 to 400%
400%
No.
Name
Setting Range
Default
n8-89
Output Voltage Limit Switch Hysteresis Width
0 to n8-88
3%
No.
Name
Setting Range
Default
n8-90
Output Voltage Limit Switch Speed
0 to 200%
200%