YASKAWA Sigma-7-Series, Product Manual, Page: 60 / 182

3.2 Settings for Triggers at Preset Positions
3.2.3 Setting Trigger Outputs at Preset Positions with the S
3
T
rigger
s
at Pr
e
s
et Po
s
ition
s
3-9
3.2.3 Setting Trigger Outputs at Preset Positions with the
S
This section provides the setting procedure to execute triggers at preset positions from the Sig-
maWin+.
The flow of operation from making settings for triggers at preset positions through writing data
to the SERVOPACK is described. Refer to the following manual for details on editing tables on
the S.
AC Servo Drive Engineering Tool S Operation Manual (Manual No.: SIET S800001 34)
1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select Set Triggers at Preset Positions in Table Program.
The Set Triggers at Preset Positions Dialog Box will be displayed.
If you use S version 7.22 or earlier, Set Trigger at Preset Positions is displayed
in Diagnostic, not in Table Program.
Information