YASKAWA Lift Inverter L1000V, Technical Manual

Page: 82 / 282

4.5 Auto-Tuning
82 YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual
u
Auto-Tuning Operation Example
The following example demonstrates Rotational Auto-Tuning when using OLV (A1-02 = 2).
n
Selecting the Type of Auto-Tuning
n
Enter Data from the Motor Nameplate
After selecting the type of Auto-Tuning, enter the data required from the motor nameplate.
Note: These instructions continue from Step 8 in “Selecting the Type of Auto-Tuning”.
Note: Refer to Input Data for Motor Auto-Tuning: T1 on page 83 for details.
Step Display/Result
1. Turn on the power to the drive. The initial display appears.
2.
Press or until the Auto-Tuning display appears.
3. Press to begin setting parameters.
4.
Press to display the value for T1-01.
5.
Press to select the digit to be modified.
6.
Press to select Rotational Auto-Tuning.
7.
Save the setting by pressing .
8. The display automatically returns to the display shown in Step 3.
Step Display/Result
1.
Press to access the motor output power parameter T1-02.
2.
Press to view the default setting.
3.
Using to select the correct digit and or to change the digit value, enter the motor power
nameplate data in kW.
4.
Press to save the setting.
5. The display automatically returns to the display in Step 1.
6.
Repeat Steps 1 through 5 to set the following parameters:
• T1-03, Motor Rated Voltage
• T1-04, Motor Rated Current
• T1-05, Motor Base Frequency
• T1-06, Number of Motor Poles
• T1-07, Motor Base Speed
RESET