YASKAWA Lift Inverter L1000V, Technical Manual, Page: 243 / 282

B.3 Parameter Table
YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual 243
Pa
ra
met
e
r Li
st
B
u
U: Monitors
Monitor parameters allow the user to view drive status, fault information, and other data concerning drive operation.
n
U1: Operation Status Monitors
No. (Addr.) Name Description
Analog Output
Level
Unit Page
U1-01
(40H)
Speed Reference
Monitors the speed reference.
10 V: Max frequency
0.01 Hz
<31>
–
U1-02
(41H)
Output Speed
Displays the output speed.
10 V: Max frequency
0.01 Hz
<31>
–
U1-03
(42H)
Output Current
Displays the output current.
10 V: Drive rated
current
0.01 A –
U1-04
(43H)
Control Method
0: V/f Control
2: Open Loop Vector Control
No signal output
available
– –
U1-05
(44H)
Motor Speed
Displays the motor speed feedback.
10 V: Max Frequency
0.01 Hz
<31>
–
U1-06
(45H)
Output Voltage Reference
Displays the output voltage.
10 V: 200 Vrms
<9>
0.1 Vac –
U1-07
(46H)
DC Bus Voltage
Displays the DC bus voltage.
10 V: 400 V
<9>
1 Vdc –
U1-08
(47H)
Output Power
Displays the output power (this value is calculated internally).
10 V: Drive rated
power (kW)
<12>
–
U1-09
(48H)
Torque Reference
Monitors the internal torque reference.
10 V: Motor rated
torque
0.1% –
U1-10
(49H)
Input Terminal Status
Displays the input terminal status.
No signal output
available
– –
U1-11
(4AH)
Output Terminal Status
Displays the output terminal status.
No signal output
available
– –
All Modes
common_
TMonly
All Modes
common_
TMonly
All Modes
common_
TMonly
All Modes
common_
TMonly
V/f w PG OLV w PG V/f OLV
All Modes
common_
TMonly
All Modes
common_
TMonly
All Modes
common_
TMonly
common_
TMonly
V/f OLV
All Modes
common_
TMonly
Digital input terminal
S1 enabled
Digital input terminal
S2 enabled
Digital input terminal
S3 enabled
Digital input terminal
S4 enabled
Digital input terminal
S5 enabled
Digital input terminal
S6 enabled
All Modes
common_
TMonly
Multi-Function
Digital Output 1
(relay MA/MB-MC) enabled
Multi-Function
Digital Output 2
(terminal P1-PC) enabled
Multi-Function
Digital Output 3
(relay MD/ME-MF) enabled