YASKAWA LA500, Technical Manual, Page: 277 / 376

Parameter
List
11
11.15 Parameters that Change from the Default Settings with A1-02 [Control Method Selection]
YASKAWA SIEPYEULA5001C LA500 Technical Manual 277
11.15 Parameters that Change from the Default Settings with
A1-02 [Control Method Selection]
The values for the parameters in these tables depend on the values for parameter A1-02 . When you change the
setting for A1-02 , the default settings will change.
Table 11.1 A1-02 = 0, 2 [V/f, OLV]
No. Name Range Unit
Control Method
V/f
[A1-02 = 0]
OLV
[A1-02 = 2]
C3-01 Slip Compensation Gain 0.0 - 2.5 0.1 0.0 1.0
C3-02 Slip Compensation Delay Time 0 - 10000 1 ms 2000 200
C3-05 Output Voltage Limit Operation Selection 0, 1 - - 0
C4-02 Torque Compensation Delay Time 0 - 10000 1 ms 200 20
E1-08 Mid Point A Voltage 0.0 - 510.0 0.1 V 15.0
*1
25.0
E1-09 Minimum Output Frequency 0.0 - 400.0 0.1 Hz 1.5
*1
0.3
E1-10 Minimum Output Voltage 0.0 - 510.0 0.1 V 9.0
*1
5.0
S1-01 Zero Speed Level at Stop 0.0000 to 9.9999 0.001% 1.000 2.400
*1 The default setting changes when the drive model and E1-03 [V/f Pattern Selection] change.