YASKAWA GA80U4720ABM, Manual

Page: 173 / 1016

Startup
Procedure
and
T
est
Run
4
4.6 Keypad Operation
YASKAWA SIEPC71061737B GA800 Drive Technical Reference 173
6.
Push or to select the parameters to return to their default settings, then push .
7.
Push (Default).
8.
Push .
The modified parameters are now set to default values.
◆
Show Fault History
You can examine a maximum of 10 fault codes and dates and times that the faults occurred.
Note:
• Make sure that you first set the date and time on the keypad if you will monitor the date and time of the faults.
• If the keypad does not have a clock battery, you must set the date and time each time you energize the drive.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Modified Parameters/Fault History], then push .