YASKAWA GA800 Series, Technical Reference

Page: 154 / 1016

4.6 Keypad Operation
154 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
5.
Push or to select [Custom Monitor 1], then push .
6.
Push or to select the monitor number to register, then push .
Set the x-xx part of monitor Ux-xx . For example, to show monitor U1-05 , set it to “105” as shown in this figure.
The configuration procedure is complete.
◆
Show Custom Monitors
The procedure in this section shows how to show the registered custom monitors.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Custom Monitor], then push .
The keypad shows the selected monitor as shown in this figure.