YASKAWA CPU 013C, Manual

Page: 44 / 263

RN ST SF FC SD Meaning
● ○ ○ X X CPU is in state RUN without error.
X X ● X X There is a system fault. More information can be found in the
diagnostics buffer of the CPU.
X X X ● X Variables are forced.
X X X X ● Accessing the memory card
X BB X X X Blinking with 10Hz: Configuration is loaded
Overall reset
○ BB X X X Blinking with 1Hz: Overall reset is requested
○ BB X X X Blinking with 2Hz: Overall reset is executed
○ BB X X X Blinking with 10Hz: Overall reset with none hardware configura-
tion respectively with hardware configuration from memory card.
Reset to factory setting
● ● ○ ○ ○ Reset to factory setting is executed
○ ● ● ● ● Reset to factory setting finished without error. Then a power cycle
is necessary
Firmware update
○ ● BB BB ● The alternate blinking indicates that there is new firmware on the
memory card.
○ ○ BB BB ● The alternate blinking indicates that a firmware update is exe-
cuted.
○ ● ● ● ● Firmware update finished without error.
○ BB BB BB BB Blinking with 10Hz: Error during Firmware update.
on: ● | off: ○ | blinking: BB | not relevant: X
Ethernet PG/OP channel
L/A
(Link/Activity)
S
(Speed)
Meaning
green green
● X The Ethernet PG/OP channel is physically connected to the Ethernet inter-
face.
○ X There is no physical connection.
BB X Shows Ethernet activity.
● ● The Ethernet interface of the Ethernet PG/OP channel has a transfer rate of
100Mbit.
● ○ The Ethernet interface of the Ethernet PG/OP channel has a transfer rate of
10Mbit.
on: ● | off: ○ | blinking: BB | not relevant: X
VIPA System SLIO
Hardware description
Structure > LEDs
HB300 | CPU | 013-CCF0R00 | en | 16-40 44