5.8.6 Status indication
Digital output
LED
green
Description
DO +0.0 ... DO +0.7
●
Digital output Q+0.0 ... 0.7 has "1" signal
○
Digital output Q+0.0 ... 0.7 has "0" signal
DO +1.0 ... DO +1.3
●
Digital output Q+1.0 ... 1.3 has "1" signal
○
Digital output Q+1.0 ... 1.3 has "0" signal
Power supply
LED
green
Description
1L+
●
DC 24V electronic section supply
○
DC 24V electronic section supply not available
2L+
●
DC 24V power section supply outputs OK
○
DC 24V power section supply outputs OK
3L+
●
DC 24V power section supply SLIO bus OK
○
DC 24V power section supply SLIO bus not available
5L+
●
DC 24V power section supply inputs OK
○
DC 24V power section supply inputs not available
Error
LED
red
Description
1F
●
Error power supply sensor
○
no error
2F
●
Error at overload respectively short circuit at the outputs
○
no error
on: ● | off: ○
5.9 Diagnostic and interrupt
5.9.1 Overview
The parametrization allows you to define the following trigger for a hardware interrupt:
n
Edge at an digital interrupt input
n
Reaching the comparison value
n
Overflow respectively at overrun upper counter limit
n
Underflow respectively at underrun lower counter limit
n
Opening the HW gate with open SW gate - except for counter 3
n
Closing the HW gate with open SW gate - except for counter 3
Hardware interrupt
VIPA System SLIO
Deployment I/O periphery
Diagnostic and interrupt > Overview
HB300 | CPU | 013-CCF0R00 | en | 16-40
145
