3.
Push the screwdriver down
ð
The connector is unlocked and can be removed by turning downwards.
CAUTION!
Via wrong operation such as pressing, the screwdriver upward
the release lever may be damaged.
1.
For demounting and exchange of a (head) module or a group of
modules, due to mounting reasons you always have to remove the
electronic module right beside. After mounting it may be plugged
again.
Press the unlocking lever at the lower side of the just mounted right module and pull
it forward.
2.
Turn all the locking lever of the CPU to be exchanged upwards.
3.
Pull the CPU forward.
4.
For mounting turn all the locking lever of the CPU to be mounted upwards.
5.
To mount the CPU put it to the periphery module and push it, guided by the stripes,
to the mounting rail.
6.
Turn all the locking lever downward, again.
7.
Plug again the electronic module, which you have removed before. For installation
plug the electronic module guided by the strips at the lower side until this engages
to the terminal module.
CPU replacement
VIPA System SLIO
Basics and mounting
Demounting > Demounting CPU 01xC
HB300 | CPU | 013-CCF0R00 | en | 16-40
29
