Yamato IL702 Instruction Manual Download Page 36 | Manualshive

Page: 36 / 60

Yamato IL702 Instruction Manual Download Page 36

33

4. Operating procedures

Useful functions (RS485 communication function)

⑦

BCC

This is a check code for error detection and is an exclusive OR

（

EX-OR

）

of all characters

from STX to ETX. This code (BCC) will not be embedded in a reply message when the item

BCC check for communication setting is set to

“None”.

⑧

ACK

This is an acknowledgement code and is returned embedded in a

“reply message” from the

Unit when the message received with the Unit contains no error.

⑨

NAK

This is a negative acknowledgement code and is returned embedded in a

“reply message”

from the Unit when the

“request message” received with the Unit contains an error.

⑩

ERR type

When a

“request message” received with the Unit contains an error, its description is

embedded after

“

⑨

NAK

” in the “reply message” from the Unit.

This is a communication error and its detailed expression is omitted here.

Reception timeout means a case STX is not sent from the Unit after some response wait time

after a host PC has sent BCC.

«
...
34
35
36
37
38
...
»

Summary of Contents for IL702





























































Reviews:

No comments