
13
3. Names and functions of parts
Operation panel
FIXED TEMP.
PAUSE
AUTO
START
AUTO
STOP
PROGRAM
PAUSE
TEMP. SET
TIME SET
ENTER
CANCEL
TIMER
SET TEMP.
℃
MEASURED TEMP.
HR
MIN.
HEATER
TIME
CLOCK
CLOSED TIME
RUN
STOP
RETURN 2SEC
POWER
No.
Name
Operation
/
action
①
HEATER lamp
Lights when the heater is turned on.
②
HOUR lamp
Lights when the timer is set in hours.
③
TIME lamp
Lights when the timer is set in clock time.
④
REMAINING HOUR lamp
Lights when the Timer screen displays the remaining operation time.
⑤
RUN/STOP key
The key is used to start/stop specific operation.
⑥
POWER key
The key is used to turn on or off the power to the controller.
⑦
PROGRAM key
The key is used to select program operation.
⑧
AUTO STOP key
The key is used to select auto stop operation.
⑨
AUTO START key
The key is used to select auto start operation.
⑩
FIXED TEMP key
The key is used to select fixed temperature operation.
⑪
Measured Temperature Display
Screen
The screen displays the measured temperature and error numbers.
⑫
Operation Guide Screen
The screen describes status.
⑬
Set Temperature Display Screen The screen displays the set temperature and parameter settings.
⑭
Timer Display Screen
The screen displays the set time and the remaining hours.
⑮
HOUR UNIT/MIN UNIT lamps
One of these comes on when the time setting is the hour or minute.
⑯
TEMP. SET/TIME SET(time)keys The keys are used to set or change temperature and time for the fixed
temperature operation or program operation.
⑰
DIGIT SHIFT key
The key is used to shift a digit during setting.
⑱ ▼▲
keys
The keys are used to increase/decrease settings.
⑲
CANCEL key
The key is used to go back to the previous parameter item or to clear
parameter settings.
⑳
ENTER key
The key is used to advance to the next parameter item or to determine a
parameter setting.
②
③
④
⑤
⑥
①
⑮
⑭
⑬
⑦
⑧
⑨
⑩
⑪
⑯
⑲
⑳
⑱
⑰