Yamatake HGC303, User Manual

Page: 27 / 130

Yamatake Corporation Installation
Model HGC303 - Heat Value Gas Chromatograph 2-7
~Note
*Installing and Uninstalling the model HFA100
Installing: Connect the model HFA100 to the PC’s USB port. An new icon will
appear on the taskbar.
Uninstalling:Select the “Stop HFBADRV (HFA100 FB Adapter)” from the task-
bar.
* Default setting of HGC system device (normally no change required)
Usable setting range
FB initialization should be done when either PD_TAG or Node Address is
changed.
Model No. PD_TAG Node address
HGC303 HGC 0×F7
HMU303 HMU 0×10
HDM303 HDM303 0×10
HFA100 HFA100 0×FC
PD_TAG First three characters must be model No.
Node address
HMU system
0×10 - 0×13
0×E0 - 0×F7
0×FC - 0×FF
HDM system
0×10 - 0×24
0×E0 - 0×F7
0×FC - 0×FF

CAUTION
* The device has been factory set for the user's application therefore the default
value should suit your process. However, when changing the settings, have a thor-
ough understanding of the parameters beforehand.
* “Fieldbus device configuration” is only for authorized service personnel. If the
“Fieldbus device configuration” button is clicked, shutdown at once and then restart
“HFA Config.exe”.