Yamaha YZF-R1 2012, Service Manual

Page: 139 / 556

PERIODIC MAINTENANCE
3-20
2. Check:
• Tire surfaces
Damage/wear
→
Replace the tire.
WARNING
EWA13190
It is dangerous to ride with a worn-out tire.
When the tire tread reaches the wear limit,
replace the tire immediately.
WARNING
EWA14090
After extensive tests, the tires listed below
have been approved by Yamaha Motor Co.,
Ltd. for this model. The front and rear tires
should always be by the same manufac-
turer and of the same design. No guarantee
concerning handling characteristics can be
given if a tire combination other than one
approved by Yamaha is used on this vehi-
cle.
WARNING
EWA13210
New tires have a relatively low grip on the
road surface until they have been slightly
worn. Therefore, approximately 100 km
should be traveled at normal speed before
any high-speed riding is done.
TIP
For tires with a direction of rotation mark “1”:
• Install the tire with the mark pointing in the
direction of wheel rotation.
• Align the mark “2” with the valve installation
point.
Tire air pressure (measured on
cold tires)
Loading condition
0–90 kg (0–198 lb)
Front
250 kPa (2.50 kgf/cm², 36 psi)
Rear
290 kPa (2.90 kgf/cm², 42 psi)
Loading condition
90–189 kg (198–417 lb)
Front
250 kPa (2.50 kgf/cm², 36 psi)
Rear
290 kPa (2.90 kgf/cm², 42 psi)
High-speed riding
Front
250 kPa (2.50 kgf/cm², 36 psi)
Rear
290 kPa (2.90 kgf/cm², 42 psi)
Maximum load
189 kg (417 lb)
* Total weight of rider, passenger, cargo
and accessories
1. Tire tread depth
2. Side wall
3. Wear indicator
Wear limit (front)
1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Wear limit (rear)
1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Front tire
Size
120/70 ZR17M/C (58W)
Manufacturer/model
MICHELIN/POWER PURE A
(1KB8, 1KB9, 1KBJ, 1KBK)
Manufacturer/model
DUNLOP/Qualifier II (1KB8,
1KBH, 1KBJ, 1KBP)
Rear tire
Size
190/55 ZR17M/C (75W)
Manufacturer/model
MICHELIN/POWER PURE
(1KB8, 1KB9, 1KBJ, 1KBK)
Manufacturer/model
DUNLOP/Qualifier II (1KB8,
1KBH, 1KBJ, 1KBP)