10. Tighten:
9
Base valve
1
NOTE:
Hold the damper assembly with the cap bolt
ring wrench
2
and use the cap bolt wrench
3
to tighten the base valve with specified torque.
11. After filling, pump the damper assembly
1
slowly up and down more than 10 times to
distribute the fork oil.
5-35
CHAS
FRONT FORK
12. While protecting the damper assembly
1
with a rag and compressing fully, allow
excessive oil to overflow on the base valve
side.
c
C
Take care not to damage the damper
assembly.
13. Allow the overflowing oil to escape at the
hole
a
in the damper assembly.
14. Check:
9
Damper assembly smooth movement
Tightness/Binding/Rough spots
→
Repeat
the steps 2 to 13.
29 Nm (2.9 m•kg, 21 ft•lb)
Cap bolt wrench:
YM-01500/90890-01500
Cap bolt ring wrench:
YM-01501/90890-01501
1C3-9-32-5B 4/7/06 2:47 PM Page 20
