5-25
CHAS
FRONT BRAKE AND REAR BRAKE
2. Air bleed:
9
Brake system
Refer to “BRAKE SYSTEM AIR BLEED-
ING” section in the CHAPTER 3.
3. Inspect:
9
Brake fluid level
Fluid at lower level
→
Fill up.
Refer to “BRAKE FLUID LEVEL INSPEC-
TION” section in the CHAPTER 3.
4. Install:
[Front]
9
Reservoir float
9
Diaphragm
9
Master cylinder cap
1
9
Screw (master cylinder cap)
2
[Rear]
9
Diaphragm
9
Master cylinder cap
1
9
Bolt (master cylinder cap)
2
c
C
After installation, while pulling the lever in
or pushing down on the pedal, check
whether there is any brake fluid leaking
where the union bolts are installed respec-
tively at the master cylinder and caliper.
A
Front
B
Rear
5. Install: (rear brake only)
9
Protector
1
9
Bolt (protector)
2
2 Nm (0.2 m•kg, 1.4 ft•lb)
2 Nm (0.2 m•kg, 1.4 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
1C3-9-32-5A 4/7/06 2:45 PM Page 50
