4 - 104
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
• 2nd wheel gear (28T)
1
• 4th wheel gear (25T)
2
• 3rd wheel gear (28T)
3
• 5th wheel gear (22T)
4
• 1st wheel gear (31T)
5
• O-ring
6
To drive axle
7
.
NOTE:
• Apply the molybdenum disulfide oil on the
1st, 2nd and 3rd wheel gears inner circum-
ference and on the end surface.
• Apply the molybdenum disulfide oil on the
4th and 5th wheel gears inner circumference.
• Apply the lithium soap base grease on the O-
ring.
New
3. Install:
• Washer
1
• Circlip
2
NOTE:
• Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the washer and
gear
b
.
• Be sure the circlip end
c
is positioned at
axle spline groove
d
.
New
4. Install:
• Collar
1
NOTE:
• Apply the lithium soap base grease on the oil
seal lip.
• When installing the collar into the crankcase,
pay careful attention to the crankcase oil seal
lip.
www.PlanDeGraissage.org