2 - 21
SPEC
CABLE ROUTING DIAGRAM
È
Insert the fuel tank breather hose into the hole in
the steering stem cap.
É
Pass the oil tank breather hose on the outside of
the AC magneto lead, neutral switch lead, light
switch lead, wire harness, starter motor lead, neg-
ative battery lead and cylinder head breather
hose.
Ê
Fasten the diode and rectifier/regulator lead, with
the diode at its white tape and the rectifier/regula-
tor lead at its protecting tube.
Ë
Fasten the wire harness, starter motor lead and
negative battery lead so that the plastic locking tie
ends do not contact the ignition coil lead.
Ì
Fasten the wire harness, rectifier/regulator lead,
coolant reservoir hose, hot starter cable, negative
battery lead and starter motor lead.
Í
Fasten the wire harness, negative battery lead,
starter motor lead, rectifier/regulator lead and
coolant reservoir hose at the white tape for the
negative battery lead.
www.PlanDeGraissage.org
