4 - 41
ENG
VALVES AND VALVE SPRINGS
Combination of cylinder head and valve lifter
1. Combination:
For this combination, match the paint color
on the cylinder head with that on the valve
lifter according to the chart below.
NOTE:
When you purchase a cylinder head, you can-
not designate its size. Choose the valve lifter
that matches the above chart.
Combination
Cylinder head mark
a
(color)
Valve lifter mark
b
(color)
Red
Red
Blue
Blue
Yellow
Yellow
Purple
Black
a
b
ASSEMBLY AND INSTALLATION
Valve and valve spring
1. Apply:
• Molybdenum disulfide oil
Onto the valve stem and valve stem seal.
2. Install:
• Valve
1
• Valve spring seat
2
• Valve stem seal
3
• Valve spring
4
• Valve spring retainer
5
To cylinder head.
NOTE:
• Make sure that each valve is installed in its
original place, also referring to the painted
color as follows.
Intake (middle)
a
: yellow
Intake (right/left)
b
: white
Exhaust: no paint
• Install the valve springs with the larger pitch
c
facing upward.
d
Smaller pitch
New
www.PlanDeGraissage.org
