1 - 10
GEN
INFO
CONTROL FUNCTIONS
EC150000
CONTROL FUNCTIONS
MAIN SWITCH
Functions of the respective switch positions
are as follows:
ON:
The engine can be started only at this position.
OFF:
All electrical circuits are switched off.
Main switch indicator light
The main switch
1
is equipped with an indica-
tor light
2
to avoid forgetting to turn it off. This
light functions as follows.
• It lights up with the main switch “ON”.
• It goes out when the engine increases its
speed after being started.
• It lights up again when the engine is stopped.
NOTE:
If the indicator light will not light up with the
main switch “ON”, it shows a lack of the battery
voltage. Recharge the battery. If the engine is
kick started, turn off the light switch.
ENGINE STOP SWITCH
The engine stop switch
1
is located on the left
handlebar. Continue pushing the engine stop
switch till the engine comes to a stop.
START SWITCH
The start switch
1
is located on the right han-
dlebar. Push this switch to crank the engine
with the starter.
www.PlanDeGraissage.org
